Best Table Saw for Beginners: The Top 10 Saws & Your Ultimate Guide

Deciding which table saw is the best table saw for beginners could be very challenging if you do not know where exactly you should pay your attention to.

The work of a table saw is vast in the sawing world. And it is especially like a workhorse to the woodworkers. Because this saw alone can be used for cross-cutting, miter cutting, bevel cutting, rip cutting, groove and rabbet cutting, dado cutting, etc. many other types of woodcutting.

See, if only one saw can be used to do more than half of the woodworking in a shop or any other job site, then why won’t it be the workhorse for its owner? And do you know what makes it more useful for woodworkers? Well, it is very easy to work with a table saw. All you have to do is to take the proper measurements then adjust the workpiece with the saw blade and then you let the saw do the rest for you. In the end, you will get a quick, clean, and efficient cut on your workpiece for your project.

But there is always a negative side to everything. While a table saw is the most useful tool, it is also very dangerous if not handled properly. This is why you should learn to use a table saw first with one that ensures your safety and which is easy to work with. 

Not only that, but you also need a saw that doesn’t only cut straight. Rather, you need one that is able to perform complicated cutting jobs easily. And to help you make the right choice choosing the right saw, we have prepared this list with the best table saw for beginners.

So aren’t you interested to find out more?

3 Best Products Among the Best Table Saw for Beginners.

Here are back-to-back Reviews of the Best Table Saw for Beginners…

Makita 2705 Contractor Table Saw

For those who are new in the sawing industry, this Makita 10 inch contractor table saw can be a very good way for a kick start. As a beginner wouldn’t know how to use a table saw, but this Makita 2705 can ease up all of their worries with its user-friendly operation.

We all know a table saw is comparatively a dangerous power tool, so safety is a top priority. That’s why it has an adjustable dual sided tool-less transparent blade guard with an adjustable riving knife. So users can see the blade when it touches the material.

There are also two anti-kickback pawls, a big switch and the electric brake in this saw that not only provides more safety but also increases its efficiency.

With its 15 AMP motor, 10-inch diameter 32T carbide-tipped blade & its 4800 RPM, this saw can rip up to 25 inches of wood. When it’s angled in 90^o or 45^o, it can still rip out 4X of its materials in only one press. So you can rest assured of the strength of this saw.

The plain aluminum die-cast, extending table of this saw that also happens to have a smooth and precise rip fence allows the users to make accurate measurements that eventually result in accurate cuts. Besides, you’ll have a miter gauge and a scale with a magnifying feature to help you make the most precise measurement.

And do you want to know what the best thing is? All the tools mentioned above comes with the saw including a push stick and wrenches of several types.

Top Specs

• Product model: 2705
• Product weight: 67 pounds
• Dimensions: 32 x 36 x 15.3 inches
• Power source: Corded
• Blade speed: 4800 RPM
• Motor: 15 AMP

Key Features

• All the tools such as the rip fence, miter gauge, blade, push stick, wrenches that are required to be used with the saw come with the package.
• 15 AMP powerful motor provides blade speed up to 4800 RPM allows the 32T carbide-tipped blade to rip through 4X of materials even when it is angled in 90^o or 45^o.
• An easily readable scale with a magnifying lens helps to make the correct measurements along with the help of the smooth rip fence and extending table.
• Proper safety preparation is taken with the help of the dual-sided tool-less adjustable blade guard, dual anti-kickback pawls, electric brake, and the adjustable riving knife.

Pros

• Adjustable blade
• Tool-less blade guard
• Electric brake
• Powerful motor
• Adjustable blade guard
• Adjustable riving knife
• All tools included
• Magnifiable scale
• Smooth rip fence
• Large & multi-angle cutting capacity
• Right extension table

Rockwell BladeRunner X2 RK7323 Compact Table saw

Table saw or tabletop saw; no matter what you call it, this is one of the best table saw for beginner. Moreover, it’s a lightweight one and as a result, can be carried anywhere.

Basically, it is quite different from a typical table saw. We mostly find the table saw with a circular blade whereas this one has long blades like just like that of a jigsaw. You’ll be able to use any type of 4-inch T-shank blade available in the market. However, you’ll have 5 of them sent to you along with the pack. And the best thing about these blades is that they can be replaced within seconds and also don’t require any tools. 

Due to the use of these blades, miter cutting and scroll cutting are also possible with this table saw in addition to the usual cross and rip cutting capability of its kind.

As it is a lightweight table saw, it only has a 5.5 AMP motor that provides 3000 RPM speed of the blade. For this reason, this saw can make intricate scroll cuts. You can cut wood, metal, plastic, ceramic with this saw but you cannot use it on any large materials or for very heavy tasks.

Lastly, there is an on-the-go storage facility within the saw body where you can store rip fence, extra blades, or your miter gauge.

Top Specs

• Product model: RK7323
• Product weight: 17 pounds
• Dimensions: 16.1 x 17.5 x 8.3 inches
• Power source: Corded
• Blade speed: 3000 RPM
• Motor: 5.5 AMP
• Warranty: 3 years limited consumer warranty

Key Features

• Cross-cutting, rip cutting, 0^o-60^o miter cutting, and intricate scroll cutting are possible with this table saw.
• Uses 4-inch T-shank blades with quick and tool-less replacement.
• 5.5 AMP motor provides enough strength for 3000 RPM blade speed.
• It is able to cut through any wood, plastic, ceramic, or metal as long as it is light and thin.

Pros

• Lightweight
• Easily replaceable 5 types of blades
• Very simple to use
• Guard
• Multiple types of cutting facility
• Riving knife
• Portable
• Safety switch
• 3000 RPM
• On-board storage
• Can cut almost any thin materials

Cons

• Can’t perform heavyweight works
• Makes a lot of noise
• Blades may get bend

Dewalt DWE7485 Compact Jobsite Table Saw

You have seen a portable table saw which can only do lightweight works. Now we have brought to you another portable table saw which can perform most of the big works.

It has a powerful 15 AMP motor that allows 5800 AMP blade speed and can rip 4x8s of up to 24.5-inch woods. As a result, it is able to perform almost all of the heavyweight works you would want to do with a table saw.

Although you would not be able to make intricate cuts with it, you can still cut your materials at 90^o-45^o angles.

For making fast and accurate adjustments on different materials of any shape, there is a rack and pinion telescoping rip fence with this saw. Furthermore, there is also a good miter gauge for taking accurate measurements.

Speaking of which, it is time to tell you that along with the rip fence and the miter gauge, a push stick, riving knife, anti-kickback pawls, a blade with its changing wrenches, & the modular guard system comes in the pack of the saw.

This portable table saw also has an interior storage facility where you can carry the accessories such as the push stick or other things with the saw.

Top Specs

• Product model: DWE7485
• Product weight: 53.3 pounds
• Dimensions: 26.65 x 14.08 x 27.15 inches
• Power source: Corded
• Blade speed: 5800 RPM
• Motor: 15 AMP
• Warranty: 90 days money-back guarantee, 1-year free service, 3-year limited warranty

Key Features

• All necessary components included with the package of the saw.
• The powerful motor of 15 AMP can perform tough cuts with the 5800 RPM blade speed.
• Long-time warranty with additional services and money-back guarantee.
• Can rip through 2×4 woods of up to 24.5 inches.

Pros

• Portable
• On-board storage
• Dust port
• Telescoping rip fence
• Blade brake
• 5800 RPM speed
• Modular guard system
• Powerful motor
• Anti-kickback pawls

At a Glance

Yes we know, table saws aren’t a very easy tool to master especially if you happen to be a beginner. The picture below will show you the dos & don’ts that you need to keep in mind. Also, ENJOY the visual!

Share this Image On Your Site

</p> <p><strong>Please include attribution to powertoolsguyd.com with this graphic.</strong></p> <p><a href=’https://powertoolsguyd.com/best-table-saw-for-beginners/’><img src=’https://powertoolsguyd.com/wp-content/uploads/2020/11/125791572_840420610105807_373722174732165212_n-min-scaled.jpg’ alt=’best table saw for beginners’ width=’1200px’ border=’0′ /></a></p> <p>

Dewalt DWE7491RS Table Saw

With its rolling adjustable stand design and versatile cutting options, this Dewalt saw is undoubtedly one of the best table saws for beginners. You want to know how? Let’s find out below.

This is a powerful table saw with a high torque 15 AMP motor and a 10 inch-24 toothed carbide blade that performs 4800 RPM. This ultimately produces the ability for this saw to rip 32.5-inch material at the right side of the blade.

The process is further eased up by the rack & pinion telescoping fence that can adjust with any material of any shape. Moreover, the rip fence of this table saw flips on both sides. Due to these various types of adjustment with the material, this saw can cut through anything of broad as well as narrow shapes.

The special feature of this saw is its rolling stand design because of which this saw can be transported from one place to another easily. Not only that, because of the rolling stand design, this table saw has superb stability both while using it and when it is in the breakdown state.

Top Specs

• Product model: DWE7491RS
• Product weight: 110 pounds
• Dimensions: 31 x 24.5 x 31 inches
• Power source: Corded
• Blade speed: 4800 RPM
• Motor: 15 AMP
• Warranty: 90 days money-back guarantee, 1-year free service, 3-year limited warranty

Key Features

• The rolling stand design makes the saw easily transportable as well as provides great stability.
• Both very narrow to wide cuts can be made with this saw because of its multi-featured fence.
• Due to its 15 AMP powerful motor and fast blade speed, it can cut through many large and heavy materials.

Pros

• On-board storage
• Rolling stand design
• Dust port
• Telescoping rip fence
• 15 AMP motor
• 4800 RPM blade speed
• Patented material support
• Great for new users

Cons

• Poor miter gauge

Review: Dewalt DWE7491RS

Jet 708675PK Deluxe Xacta Cabinet Table Saw

After a long series of rather small-sized and portable table saw, this time we have a big cabinet table saw to offer you. Moreover, it is also one of the best choices for a table saw for the newbies as well as the experts of the sawing world.

With its large table and body, comprised of the motor and blade and the safety precautions featured in the saw made it ideal for the new woodworkers to learn their way around a table saw.

The cast iron table of this saw is normally of 29×20 inches (LxB) but can be extended up to 29×42 inches when necessary. This creates the opportunity for its users to cut and handle a large piece of material easily. There is also a 50-inch rip fence at the right side of the blade for making proper adjustments to the cutting material. And you will also get a deluxe miter gauge with the saw to take the proper measurements.

Now about the blade and motor; there is a 3 horsepower motor with the saw that spins the 10-inch blade at the speed of up to 4300 RPM. You do not have to worry about the strength because this is enough for heavy works. And the powerful motor won’t make too much noise as there is a Poly-V drive belt system in the saw for silent operation,

You will have an industrial-grade on/off switch that prevents the saw from restarting unless the “on” button is used. It also safeguards the saw from any power fluctuations to keep it intake for a long time. Apart from this, it also has other safety measures such as the blade guard, riving knife, etc.

Top Specs

• Product model: 708675PK
• Product weight: 510 pounds
• Dimensions: 85 x 36 x 38 inches
• Power source: Corded
• Blade speed: 4300 RPM
• Motor: 3 horsepower
• Warranty: 5 years

Key Features

• Powerful motor and great blade speed to make cuts on any large materials.
• Big, extendable, and strong cast iron table provides ample room for handling large boards.
• The industrial safety switch prevents the saw from power fluctuations and keeps its motor safe.
• The 50-inch rip fence makes it further easier to support and adjust the large piece of board that you need to rip with the saw.
• Offers varieties of cuts such as the use of dado blades to make dado cuts with the table saw.

Pros

• Can be used for large projects
• Not noisy
• 3 horsepower motor
• 50-inch rip fence
• Cast iron table
• Supports dado blades
• Magnetic on/off switch
• Good safety measures
• Poly-V drive belt system
• Dust port
• Storage drawer

Cons

• Expensive

Dewalt DW745 Table Saw

When you are talking about a good power tool especially one for a beginner, it is hard to avoid Dewalt for long. See, we have again found another table saw from the Dewalt best for the newcomers. Let’s tell you what we found in it.

Just like its previous friends, the DW745 table saw is also a lightweight and portable table saw that can be carried down to any job site easily. With its 20-inch ripping capacity on the workpiece which is assisted by the rack & pinion telescoping rip fence for the perfect alignment to the measurement, produces fine and perfect cut for your project.

However, to produce fine and perfect cuts, the saw needs to be a strong one. Or else, your cuts will become zigzags. To prevent such unavoidable circumstances, the saw needs a strong motor and good blade. Luckily, you will get a 15 AMP motor and a 10-inch diameter blade formed of 24T carbide tip. Such blades not only produce fine cuts but also makes them useful for a long time. And yeah, the motor creates enough power to make the blades rotate at 3850 RPM.

All of its good things are not just in its cutting and ripping components. It also has great safety measures with a long-term warranty. Its safety facility consists of a pro-modular guarding system. Moreover, this whole saw is situated on top of a rolling metal cage for ensuring better stability of the saw and prevent it from causing unusual movements.

Top Specs

• Product model: DW745
• Product weight: 53.9 pounds
• Dimensions: 22.72 x 29.21 x 16.73 inches
• Power source: Corded
• Blade speed: 3850
• Motor: 15 AMP
• Warranty: 90 days money-back guarantee, 1-year free service, 3-year limited warranty

Key Features

• Strong and durable 24T carbide tooth blade spins in 3850 RPM speed to rip through tough workpieces.
• The powerful 15 AMP motor creates the opportunity for the blade to do such hard works.
• The pro-modular blade guard system provides safety, especially for your hands and fingers.
• 20-inch ripping capacity is in this saw assisted the telescoping rip fence.

Pros

• Portable
• Modular guard system
• Rack & pinion telescoping fence
• 10-inch carbide toothed blade
• 20-inch rip capacity
• The metal roll cage base
• On-board storage facility
• Dust port

Cons

• Faulty miter gauge

You can read in-depth Dewalt DW745S review for knowing more about it.

Powermatic PM1000 Cabinet Table Saw

From our experiments both from its specs and its user experience, we have found that this Poweramtic PM1000 is quite similar to the Jet 708675PK as both of them belong to the same parent company. As a result, it can also be stated as one of the best beginner table saw.

When I said that this Powermatic and the Jet are similar, I meant they are almost identical if we compare them by their specs. However, these differences are very minor and you won’t even feel it when you are working on a project. The big distinguishable factor between them would be their cost. Even while the Powermatic costs less but the price is quite close.

In this saw, you’ll get a 1-3/4 horsepower motor that provides 4200 RPM speed to the blade. And as it is a big cabinet saw, you will get a 30-inch room at the right of the table with the help of the 30-inch rip fence.

From the regular rip and cross-cutting facility, you will also be able to make angular cuts as well as dado cuts with a dado blade. There are ergonomic 7-inch hand wheels below the table to make proper height and angular adjustment of the blade. On the other hand, there is also a 60^o pivoting miter gauge on the table for you to make the best adjustments to your workpieces.

And by the way, as it is a cabinet table saw, it is obvious that you’ll have a storage cabinet drawer where you can store your important equipment.

Top Specs

• Product model: PM1000
• Product weight: 418 pounds
• Dimensions: 36 x 27.5 x 63.75 inches
• Power source: Corded
• Blade speed: 4200 RPM
• Motor: 1-3/4 horsepower
• Warranty: 5 years warranty

Key Features

• Ergonomic handwheels for making proper height and angular adjustments of the blade.
• Dado and bevel cutting facility in addition to the cross, rip, or miter cuts.
• 1-3/4 horsepower motor with 4200 RPM blade speed helps to work on large projects.
• It is a table saw with a storage drawer and a pivoting miter gauge as well as a 30-inch special accu-fence.

Pros

• 1-3/4 horsepower motor
• Long-term warranty
• Cast iron table
• Awesome guarding facility
• Ergonomically designed 7-inch handwheels
• Poly-V belt drive
• 30-inch accu-fence
• Dust collecter

Cons

• Expensive

Powermatic PM1000 review is here with more information.

Skilsaw SPT70WT-01 Portable Table Saw

It would be foolish if we keep this Skilsaw SPT70WT-01 out of the list of the best table saw for beginners. Because unlike most other saws, it is not only finished in being a good one. Rather, you will have some very specialized features on top of its special features that made it a best table saw for the beginners.

As you can see that it is also a portable saw. This means it is going to be lighter in weight and also from other aspects. But, while it is lightweight but all of its parts are especially strong. See the motor for example.

It has a 15 AMP motor. But the motor is made with dual copper windings so that it can remain cool and offer more strength on tougher materials.

Skilsaw has used the worm drive system in this table saw. This drive system, combined with the powerful motor and the 24T carbide tipped 10-inch blade creates the best table saw with the best ripping capability.

Thus it offers a 25-inch ripping capacity, -1^o to 46^o bevel angle on the left as well as dado cutting facility. However, you’ll need a dado insert for that and it is sold separately from the saw.

Anyway, these were its cutting facility. It also has a miter gauge and a self-aligning fence for the proper adjustments and measurements. And for your safety, it has its own anti-kickback device, guard system, etc. others.

Top Specs

• Product model: SPT70WT-01
• Product weight: 49 pounds
• Dimensions: 19.9 x 23.4 x 13.4 inches
• Power source: Corded
• Blade speed: 5300 RPM
• Motor: 15 AMP
• Warranty: 180 days money-back guarantee, 1-year warranty

Key Features

• 15 AMP power providing motor with more copper surface area for keeping it cool.
• The worm drive system is used in this table saw for better power usage and increasing torque.
• 24T carbide tipped blade rotates in 5300 RPM to produce cuts up to 3-1/2 inches depth on various materials.
• Self-aligning fence, miter gauge, wrenches, blade guard, anti-kickback device, all are available with the saw with and on-board storage facility.

Pros

• Carbide tipped blade
• Self-aligning fence
• On-board storage
• Lightweight
• Worm drive system
• Steel roll cage
• Cool dual field motor
• Dust collection port
• Dado and bevel cutting capability
• Portable
• Aluminum table
• 25-inch ripping capacity

Cons

• Only bevels towards left
• The blade is sometimes unstable
• No stand with the saw

Bosch 4100-10 Portable Table Saw

It won’t be fair to the woodworkers if there is no Bosch table saw is present in a list that consists of the best table saws for beginners.

This portable table saw from Bosch and the other portable table saws that we came across before are not so different from each other. They have some minor differences in their dimensions and specs. Apart from these dissimilarities, their features, working facility, and capability are almost similar.

Look at the motor for instance. It has a powerful 15 AMP motor that results in giving 3650 RPM blade speed. You can do almost any type of woodworking up to 20-inch ripping capacity with such motor and arbor speed without facing any major problems.

Furthermore, it comes with a miter gauge, a SquareLock rip fence, and an auxiliary fence for narrow materials, wrenches, guard system, push stick, etc. other materials with it as its safety items and accessories. Apart from these safety accessories, it also has soft start circuitry and restart protection system built in it for a better startup without accidentally turning on.

Oh silly me! I just forgot to mention that with this saw, you will get a gravity rise rubber wheeled stand for making it both portable and stable.

Top Specs

• Product model: 4100-10
• Product weight: 60 pounds
• Dimensions: 29 x 32 x 13.25 inches
• Power source: Corded
• Blade speed: 3650 RPM
• Motor: 15 AMP
• Warranty: 1-year limited warranty

Key Features

• 30-inch ripping capacity because of the large cast aluminum top table.
• A strong 15 AMP motor and 3650 RPM arbor speed covers almost any type of woodwork over your job site.
• Comes with all of the necessary equipment required for cutting and ensuring safety including its stand.
• You can keep all of the necessary equipment together with the saw because of its onboard storage facility
• The standard 10-inch carbide tipped blade is used in this portable table saw.

Pros

• SquareLock rip fence
• Strong motor
• Carbide tipped blade
• Soft start circuitry
• Restart protection
• Cast aluminum top table
• Smart guard system
• Gravity rise stand
• 3650 RPM blade speed
• On-board storage

Cons

• The elevating stand is a bit fragile
• Heavier than most of the portable table saws

Review: Bosch 4100-10

Skil 3410-02 Portable Contractor Table Saw

It is not just only a portable contractor table saw that can be carried to any job site, but also a top-notch quality heavy duty table saw ideal for the newcomers in this industry.

A newbie needs a power tool that is powerful but not so powerful one that they can’t handle while learning. And also something that offers varieties of works and can be used for a long time even after knowing their way around it.

This Skil 3410-02 is just one of that type of saw. It is powerful because of its 15 AMP motor which supports 5000 RPM blade speed and together they can cut 4x the material in just one press. The depth of those cuts is around 3.5 inches in 90^o angle and 2.5 inches when you will cut at a 45^o angle. However, you should be informed that the blade only moves towards the left side when you are bevel cutting.

Other than these ripping features, there are plenty of other equipment and safety measures present in this saw. Talk about the EZ view measurement system with the self-aligning fence that opts you to take the precise measurement and adjustments on the workpieces. You’ll also get a miter gauge on top of the cast aluminum table for taking miter adjustments. Including all of them, the saw also comes with its 10-inch carbide tooth blade, its wrenches, and other safety items and finally, all on top of a heavy duty folding steel stand.

Top Specs

• Product model: 3410-02
• Product weight: 67 pounds
• Dimensions: 28.9 x 12.99 x 20.87 inches
• Power source: Corded
• Blade speed: 5000 RPM
• Motor: 15 AMP
• Warranty: 30 days money-back guarantee & 1-year warranty

Key Features

• Cross, rip, miter, dado, and bevel cutting is possible with this table saw.
• A heavy-duty folding steel-made stand comes with the saw that makes it convenient for transportation.
• It is a powerful saw that has a 15 AMP motor and a 10-inch carbide tipped blade that rotates at 5000 RPM speed.
• Using its strength from the motor and blade it can make 3.5 inches deep cut 4x of the material in one press.

Pros

• Extending cast aluminum table
• Self-aligning rip fence
• EZ view measurement system
• 5000 RPM
• 3.5-inch cutting depth
• Carbide tooth blade
• Dado, bevel, and miter cutting features
• Steel stand
• Cut through 4x of the materials

Cons

• No dust collection port
• A separate dado kit is needed
• Troublesome miter gauge

Review: Skil 3410-02

So this is our top 10 in the list of best table saw for beginners to learn. Well, these were just the saws with their features described in short. But what if I could interest you with some mind-boggling ideas of how to buy a table saw. I think it would be to the best of my interest if I was a beginner. Truly speaking, if I had a guide that told me all about buying a table saw when I was a beginner like you, my table sawing life’s start would have been much smoother. This is why I always write a buying guide for my readers so that they do not have to put up with what I had to.

The Buying Guide!

Buying a table saw could be overwhelming especially for a beginner. As there are so many varieties of table saws specified for several types of works, it is quite hard for any newbie to decide which one would be the best for their work.

So let’s rush on to see what are things present in a table saw makes it ideal for spending money on it. And after that, we’ll also see which one among these 10 table saws can be given the most privilege for buying.

The Motor

Let’s begin the guide with that component that supplies power to the saw for cutting through the workpieces. I’m not talking about the main power source of the saw because you already know that it is electricity. I’m talking about the thing that gets powered through electricity and provides the saw with the necessary strength to do its work. Yes, you know I am talking about the motor of the saw.

You obviously know that without the motor, the blade would be able to rotate which is the only way to operate a table saw. So you understand that you would not have a saw without a motor.

But have you ever thought that what would happen if you want to cut a big piece of wood with your saw but it is just groaning and making a smoke or doing many things except for cutting? It happens either when the blade is blunt or when the motor cannot supply enough power.

Picking the best motor is very simple. You just have to know how much AMP it takes. The more the number, the better motor it is. But if you choose a motor that runs on around 5 AMP, you will only be able to cut small and thin materials. Doing heavy work with them would be impossible. So if your work does not involve only cutting thin sheets then I suggest you choose a powerful motor of around 15 AMP. Because with a 15 AMP motor, all kinds of light and heavy works can be performed. And their price difference is also not that big that it will be hard to buy a 15 AMP table saw.

The Blade

The blade of any saw is one of the most important components in it. It is not compulsory for a saw to have automated parts but it is a must to have the blade. And that too should be the best and the particular one for your work and workpiece.

It is quite hard to know for a beginner about the right blade for the right job because there are so many variables in it. You need to know the diameter, number of teeth, type of teeth, speed, and the type of your workpiece.

For a table saw, you should use a 10-inch diameter blade which is standard for most of the works done by the table saw. But depending on some very specific work, you might need a smaller or bigger blade. But a 10-inch blade will suffice most of the work.

If you have a blade with more teeth, your cuts will be finer and smoother. And if your blade has fewer teeth then the cuts made by it will be rougher. So depending on what type of cut you want, you can choose the teeth number.

Generally, a carbide tooth blade is all you need for woodwork. But if you want to cut metals or stone then you need diamond-tipped blades because you know, it is the strongest…

You’ve seen me mentioning RPM (Revolutions per Minute) with every product. If your blade rotates slowly then the cuts won’t be nice and it won’t be able to cut materials properly most of the time. RPM around 4000-5000 is a good amount of speed for a table saw blade to cut properly.

Lastly, you should choose the wood cutting blade on wood, metal cutter on metal to get the best result out of your works.

Portability

Most of the beginners’ table saws in the above list are portable. Either they are they can be carried via hands or they need or have their own stand. Having a portable table saw is more useful than the ones that can’t be moved. Because nowadays the portable table saws are strong and powerful enough to do most of the sawing jobs.

Portable table saws now have big and extendable tables that create enough room for working on a big project. And their motor and other power-related stuff are also strong enough for cutting heavy materials. I am telling you this because having a small working area was a big limitation for a portable table saw which is now eradicated.

But there are also other limitations of a portable saw such as its stand. Now you might be wondering how the most essential part of a portable table saw is its limitation?

Yes, it can be. What if your saw does not have a strong table or have a table that is not stable. Or what if it does not even have the stand or the saw does not fit on the surface of your work table? You won’t be able to do anything with the saw properly and the whole saw would be a useless piece of junk.

So you have to be careful about the stand or its grounding facility if you are buying a portable one. And if your saw is fixed on a table then you’ll get a strong one with ample working space for a big project but your only limitation would be the lack of portability.

Safety

The table saw is one of the most dangerous power tools of all. So if you are not prepared with the proper safety arrangements then you are risking your entire life.

Using a table saw brings out several dangers such as kickbacks, blade cuts, etc. This is why a table saw is jam-packed with many safety equipments. Riving knife, blade guard, anti-kickback pawls, push stick, etc. others are essential in a table saw.

So if the table saw you are choosing does not have the proper precautionary items then you definitely should not buy it.

Finally, take it from an expert of a table saw; never ever use a table saw without implementing its safety equipment as well as your own personal protective gear.

The verdict!!!

Now it is high time to decide the best beginner table saw for you. Well, I am not exactly deciding it for you. I will just tell you which table saw I found in the above list the best fit for the beginners.

So, without any further ado let me say that the DWE7491RS Table Saw is the best table saw for beginners in my opinion. To make this decision I have taken all of its good and the bad sides into consideration from my experience with the saw and found it to be easily useable by any novice user. Besides, due to its extensive features, it can also offer a wide range of working facilities through which its users would be able to work on small to big projects without facing any hassle.

If you are interested to get introduced to more of the table saws then you should check out some of our other articles on the table saws—

• Best table saw
• Top table saw for hobbyist
• Best table saw under 500