It is our WEN 10-Inch Band saw reviews. I know that you have reached here to know about it. You may already be familiar with two-speed band saw. If you are a creative wood builder person, it is essential for your work. You need to have a high-quality band saw. Using this band saw you can make endless work. So if you are looking for the most valued and useful band saw then you are at the right place. Because I am going to write about such a band saw. If you read my full content, you will be able to know all the information. You will not know if you do not read the full content. So you should read the full article about this saw.
This is good news that you can work easily using this band saw. We can make on any piece of wood using this saw. It is more than qualified enough for some low to mid-level work. It is familiar to us. Because we will feel comfortable in our work. You will work withstand and a wide table surface to carry the heaviest weight. This saw has a two-speed motor that can create cuts. The motor also runs on 120 volts of power. The wen 10-inch -velocity band saw is the right associate for any workshop. This band saw is actually powerful with a 3.5-amp motor. It has a 9-3/4 inch throat. It will glide through boards with cut up to 6 inches deep. This saw uses 72-inches blades anywhere from 1/8 to 1/2 inches in size for both intricate and powerful cuts.
The spacious paintings desk measures in at 14 x 12-1/2 inches in length. It can be swiveled up to 45 degrees. Operating allows for speeds of either 1520 or 2620 F.P.M. Ball-bearing gives the 10-inch wheels smooth operation. It will provide a long life for years of dependable service. The easy to assemble stand elevates without sacrificing space. This WEN 10-inch band saw blade will offer you good cutting speed. The fence and miter gauge are somewhat standard piece. There are some models that come without these included. The dust port is also a welcomed feature even though not many people actually put it to work. This three-in-1 dirt port will surely make matters a great deal less difficult.
You will need a powerful motor for your work. Motor is the most important for the saw and working. When I researched and reviewed this band saw. Then I found the motor and its output is not really something you need to spend too long thinking about. If a motor has adequate power for your needs in terms of amp page and rpm. Then you can put your trust in the manufacturer to deliver on that. You will find very similar motors in most of the band saws these days. They all do the same job. It’s not very difficult to find out different levels of motor quality between band saws. You can expect it to deliver on that and it is as simple as that.
Table tilt is an important condition for your work. It is possible to make bevel cuts on this band saw. Some users prefer to have a saw with the table tilt feature. It facilitates to achieve bevel cut in one or both direction. You will have to flip over the work piece to end the angular cut. Then you will realize that this table tilt plays a vital role in your work.
You will be familiar with the blade of band saw. This blade is the main part of this saw. Without blade, nobody can cut anything. This blade will help you to make what you want to create. This blade teeth will give you a more precise cut. So you should sharpen this blade to make your work easy. If you sharp this blade then your work will be comfortable.
When we work with band saw, safety is the most important matter. We should work very carefully. The safety aspect does stand out as with all other saw models. This saw is different than others. However, that does not mean it is not a safety machine, certainly, it is safe to machine. As this is a stand saw that’s why it is safe for us.
Before using any saw, we want to know about its cutting speed. But here you do not have to worry. Because The WEN 10 Inch band saw has a perfect speed. This band saw gives you the versatility of two speeds. The motor runs at 1520 or 2620 F.P.M.. You can set it at the lowest speed for soft work pieces. If you want to cut hardwood you can also set it at high speed. It has sufficient cutting power. It can bear large wooden loads without much of a struggle.
- This bandsaw has 3.5 amp motor that creates cuts up to 6 inches deep and 9-3/4 inches wide.
- Uses 72-inches blades anywhere from 1/8 to 1/2 inches in size.
- Spacious 14-1/8 x 12-half of inch solid aluminum paintings desk bevels as much as 45 ranges.
- Two-velocity operation permits for speeds of either 1520 or 2620 fpm.
- Ball-bearings deliver easy operation. It is an extended-lasting existence for years of dependable carrier.
- Includes a 2-year warranty, a work light, a 3-in-1 dust port, a fence, a miter gauge, 3/8 inch blade (6 TPI).
- Easy to assemble stand elevates the band saw without sacrificing space on the shop’s workbench.
- This allows you to have better control of your cuts without getting skewed or warped. You have a strong stand to keep the cuts clean.
- Model – 3962
- Size – 10 inches
- Power – 3.5- amp
- Cut Capacity – 6 inches
- Uses blade – 72-inches
- Item Weight – 73 Pounds
- Dimensions – 20 x 25 x 58 inches
- Worktable dimensions: 14-1/8 x 12-1/2 inches.
- Trigger Type: Variable Speed
- Voltage – 120 Volts.
- Very easy to set up.
- It is easy to assemble.
- Very perfect size to use.
- LED headlight.
- Dual speed setting.
- Triple filter dust port.
- Includes useful accessories.
- 2-year warranty.
- 90-day money-back guarantee.
- This band saw can cut smoothly.
- Any beginners can start work easily.
- Very practical, useful, well designed.
- It works well-cutting rounds at a slow speed.
- Adjusting blade tension and the tune may be very smooth.
- It’s a metal with a heavy cast desk and a sturdy stand.
- It can cut through both wood and metal.
- This band saw is good for any smaller project.
- This band saw is a great tool, under powered for re-sewing.
- Replacing the blade is not easy.
- Users had trouble centering the blade.
- The blade and tilt are difficult to adjust and setup.
- The tension knob breaks off easily because it is plastic-made.
- Once in a while, the problem might also arise for blade adjustment non-vertically.
How is this band saw powered?
Answer: It is electric and corded.
What is the rated horsepower of its motor?
Answer: 375 watts, which have to be almost 1/2″ HP.
Does WEN 10-inch run 110 or 220?
Answer: A hundred and ten, it’s far very easy to install and works fantastic.
What blade does it come with?
Answer: It comes with 72 inches by 3/8 inch but 1/8 inch to ½ inch.
Where to get the new blade?
Answer: From Machinist and Amazon.com
Am I able to use a blade width of more than 0.5 inches?
Answer: Yes, you probably could. Many users using up to 0.6th of an inch.
We have been able to know about this product. I am sure that if you are included in this field you will take a decision to buy this band saw. Because they know the benefit of this product who has already used. No one gave a bad review about this WEN 10-inch band saw reviews. All users are satisfied with this. But some users may give you some depressive advice about this band saw. Those people who could not use this saw may advise you otherwise. If you are unable to use this properly then you will not find any satisfaction. Then you can say that the product is not good. So, for helping you I want to tell you first you have got to know the proper use of this band saw. You should know how to use it properly. So let’s know how to use properly.
We know this tool, setup is very important, as with a sharp blade. With the guides retracted, the blade should be adjustable to run in the center. Then all of the courses ought to be adjusted near the blade. The user must push firmly however not too difficult on the workpiece, letting the blade do the paintings. You should keep your finger out of the path of this blade. Maintain the wheel covers close whilst the saw is jogging. Adjust the upper guide approximately 1/4 inches above the workpiece before starting the saw.
Disconnect the band saw from the power supply before changing blades. Always put on eye protection while running with the band saw. Do not open the covers until the machine has come to a whole stop. Stop the saw before removing small chips that have come stuck in the throat. Keep this band saw clean and tidy always.
We need a quality band saw that does all it can to make things easier. It avoids the need to purchase some additional parts. If you are that person who enjoys having a few extra conveniences on a band saw. If you do not want to have to pick an overall quality featured band saw. Then the WEN 10-Inch band saw reviews is the perfect saw for you. All users can depend on the saw to accommodate a number of different uses as time goes on.
You will be surprised to know that it can handle, while still giving you the ease of use and precise cutting ability. This band saw is known by all. It is the powerful motor and cutting capacity of the saw that they appreciate. So, This is a great buy for you. All the best.
Leave a Reply