wen 4214 review: 12-inch variable speed drill press

WEN 4214 is a bench-top drill press. Got different anything? Huh? Actually this article of all drill press is bench-top drill press. This drill press comes with variable speeds between 580 to 3200 RPM. The variable speeds allows you to target in the exact speed that works for your drilling projects. When you will be working then move a lever and adjust the speed as needed. You won’t have to do pulleys and belts to change! It also comes with 5 AMP powerful motor. And its motor features ball bearing for an extended life. Also, it all comes together with smooth and balanced performance even at high speeds. This cast iron drill press has the power to drill through metal, wood and other materials. The design of this drill press uses a mechanical variable speed. It allows for the same power and torque through the entire speed range. The chuck of this drill press gives you versatility with a variety of bits and on-board chuck key storage. This drill press constructed with a rigid frame. Also,  consisting of cast iron: head, table, and base. These ensures accurate holes. Also, the worktable bevels 45 degrees left and right. And operations for the perfect consistently right angles. On the other hand, the digital readout of this drill powered by LED’s displays the running speed. Moreover, the laser locks-on to your drill points saving on guesswork and sparing expensive materials. The special feature of this drill press is flexible work light. The work light will illuminate your workplace.

Mechanical Variable speed with motor

This wen 4214 drill press has a 5 AMP motor. This 5-AMP motor has strong power and capacity to work. It can last a long time. It has a full 5/8 inches of stroke capacity. Also, this motor delivers reliable performance across variable speeds. The motor allows you to drill through materials up to 1-inches thick. Even, you won’t need to constantly check whether the drill press is working at your selected speed. Also, the motor does not under perform in any overheating conditions. Even, the motor can work fine with hardwood, softwood, metal, plastic and more.

Spindle Travel

This wen drill press comes with a large spindle travel. Also, it is designed with three tall and strong spindles. This spindle will help you to get a variety of speed settings. Also, it helps you to change the speed according to your need. This spindle is not very tight. It provides a smooth operation to increase flexibility during drilling. Spindle travel helps you to make holes through a 3-1/8 on-board that has never been easier for you. So, it is an important part of this drill press.

Beveling work table

You know that the dimension of the worktable is 9-1/2 x 9-1/2-inches. This worktable is made of cast iron. It can swivel to 45 degrees for perfect adjustment with the workpieces. Here the advantage is, you can change in any one direction to make it easy for drilling. It is an important part of this drill that allows you to make precision holes.

Cast iron base

You can see on the picture given above. In this drill press,you can see the cast iron base. It is the most important part of this drill press and for your work. The sturdy cast iron base prevents wobbling or vibrating during drilling operations. Also, it prevents unnecessary or unintentional holing in the floor.

Depth Adjustment Gauge

You should set the depth adjustment gauge. It is for limiting your spindle travel for accurate and repeatable drilling operations.

Precision Laser

A precision laser point is the most noticeable point for you. You will see the laser point on your worktable. The laser pointer makes sure that you are getting an effortless drilling operations. Also, the laser light specifies you the exact spot that the bit will travel through during drilling. Moreover, you have to turn on the laser pointer to create your target center holes. Besides, ensure that the right place is determined for making holes.